South-East Vastu Defect and Repeated Fire Incidents in Factory – Case Study
A manufacturing unit approached Astrologer Ashish Somani after facing multiple fire incidents inside their plant within a short span of time.
Despite having fire safety systems, regular electrical audits, and standard operating procedures, accidents were repeating.
The management wanted to understand why these incidents were occurring again and again when everything appeared technically compliant.
A detailed Corporate Vastu Site Visit was conducted to identify the root cause.
During the Visit, It Was Identified That
On physical inspection of the premises, the following observations were made:
-
Fire incidents were mainly occurring near the production zone
-
Electrical panels in this area were frequently overheating
-
The internal temperature of the factory felt unusually high
-
Workers appeared stressed and uncomfortable
These signs indicated a possible fire element imbalance within the building.
South-East Zone Observation (Fire Zone)
During the visit, it was identified that the South-East sector of the factory was heavily loaded.
On Physical Verification, We Observed
-
Heavy production machinery placed in South-East
-
Electrical panels, generators, and boilers concentrated in the same zone
-
Floor level of South-East slightly lower than the rest of the plant
-
Limited exhaust and ventilation
Analysis
South-East is the Agni (Fire) zone.
This zone should support controlled fire activity, not excessive accumulation.
Because of heavy load and depression, fire energy was getting trapped and intensified.
This created a high-risk fire environment.
North-West Zone Observation (Air & Pressure Release Zone)
Further analysis revealed imbalance in the North-West sector.
On Physical Verification, We Observed
-
Entrance present in North-West
-
Heavy storage racks near this area
-
No windows or ventilation openings
-
Internal movement space blocked
Analysis
North-West governs air flow and pressure release.
Although an entrance existed, internal blockage prevented proper circulation.
As a result, hot air generated in South-East could not escape.
Final Diagnosis
During the visit, it was concluded that:
-
South-East was generating excessive fire energy
-
North-West was unable to release this energy
This combination was creating a pressure chamber effect inside the factory.
This was the primary Vastu reason behind repeated fire incidents.
Vastu Corrections Suggested
South-East Corrections
-
Remove unnecessary heavy storage
-
Shift part of machinery inward
-
Improve exhaust ventilation
-
Level correction where possible
-
Keep only essential fire-related equipment
North-West Corrections
-
Remove heavy racks
-
Create ventilation opening
-
Keep zone light and open
-
Maintain movement space
Supporting Measures
-
Install outward-facing exhaust fans
-
Improve cross ventilation
-
Organize wiring routes
-
Ensure clear access to fire equipment
Outcome After Corrections
Within a few months of implementing the above corrections:
-
No major fire incidents were reported
-
Electrical stability improved
-
Machinery breakdowns reduced
-
Working environment became calmer
-
Safety conditions improved
Conclusion by Astrologer Ashish Somani
Repeated fire incidents are not always technical failures.
Very often, they are the result of elemental imbalance inside the building.
Correcting South-East and North-West zones restored balance and safety in this factory.
Frequently Asked Questions (FAQ)
Can Vastu defects really cause fire accidents in factories?
Yes. When fire element accumulates excessively and air element cannot release pressure, the probability of fire incidents increases.
If a factory already follows fire safety norms, is Vastu still required?
Yes. Fire safety norms control damage after ignition. Vastu corrections aim to reduce the chances of ignition itself.
Is South-East always dangerous for machinery?
No. South-East is suitable for fire-related machinery, but only in balanced quantity with proper ventilation.
What if my factory has an entrance in North-West?
A door alone is not sufficient. The entire North-West zone must be internally open and ventilated.
Can small changes really reduce fire risk?
Yes. Shifting heavy storage, improving ventilation, and clearing pathways can create major improvement.
How long does it take to see results after corrections?
Usually within a few weeks to a few months.
Do these remedies require demolition?
Mostly no. These are layout-based, non-demolition corrections.
Corporate & Industrial Vastu Consultation
If your factory or plant is facing:
-
Repeated fire incidents
-
Electrical failures
-
Machinery breakdowns
-
High employee stress
-
Safety concerns
It may be due to Vastu imbalance.
A professional Corporate Vastu Audit by Astrologer Ashish Somani can identify hidden defects and provide practical, non-demolition corrections.
👉 Book Consultation
🌐 https://astrologerashishsomani.com
📞 Call / WhatsApp: 9824646397